MultiLane manufactures high-performance, cost-effective bit error testers, digital sampling oscilloscopes, and time domain reflectometers to benchmark the Signal Integrity performance of high speed 200 G/400 G transceivers. Eye test pattern analysis, Jitter measurement, S parameters analysis, and high-speed signal characterization including BER are some of the typical tests that are performed by these instruments in product development and production testing of both optical and electrical transceivers, interconnects, and high-speed copper or cable data links.

ML4054B is a fully featured 400 G BERT scope supporting both NRZ and PAM4 modulation types for signal analysis. Using MSA-compliant external adapters, the scope can connect to OSFP, QDD, and QSFP transceiver modules. CarlisleIT’s high speed, high density direct attach CoreHC interconnect solution is used in ML4054B to adapt and translate high-frequency signals from tightly spaced traces to 2.92 mm precision RF connectors. CarlisleIT’s CoreHC solution is a compression mount type interconnect which sits on the PCB footprint customized for high-speed signals without a board side connector. With channel-to-channel spacing of 2.5 mm, very low insertion and return loss and high mount/demount cycles, CoreHC offers high signal integrity for high-frequency signal adaptation and interconnectivity in a high-value compact size. Table 1 shows the customized 8-channel CoreHC solutions used in ML4054B BERT scope from MultiLane.

Table 1: CarlisleIT’s CoreHC solutions used in MultiLane’s ML4054B BERT scope

 

No. CarlisleIT Part Number Description MultiLane Product Use Case Quantity Needed/Used

1

TM40-0382-01 HC2 (2.5 mm) to 2.92 (M), 1RX10, .079 Shield Dia., Cable Assembly; Opp Dir. ML4054B Adapter cable – Right 1

2

TM40-0383-01 HC2 (2.5 mm) to 2.92 (M), 1RX10, .079 Shield Dia., Cable Assembly; Same Dir. ML4054B Adapter cable – Left 1

3

TM40-0271-00 HC2 to 2.92 (M) Cable Assembly, 2R X 8 CH, 079 DIA. Cable, 10″ ML4054B Breakout testing cable 1

ML4003B is a cost-effective network tester with integrated 30 Gbps BERT, 32 GHz differential, and single-ended (optionally 50 GHz) digital sampling oscilloscope and optical scope all in a compact 2U cPCI form factor. The full configuration also includes one SFP28 or one XFP port in addition to a 25 GHz (Optionally 10 GHz for a high value) optical sampling oscilloscope. It supports burst mode PON by providing a programmable AWG output that can be programmed by the user to output a custom 64 bit TTL signal, synchronous to the high-speed data. The 16-channel dual-row CoreHC cable assemblies are used to adapt the tightly spaced high-speed traces on PCBs to conveniently testable, low-loss RF coax cable channels. CoreHC assemblies use .079″ coax cables and 2.92 mm precision RF connectors good for frequencies up to 40 GHz.

Table 2: Custom CoreHC Cable Assembly used with ML4003B 

No. CarlisleIT Part Number Description MultiLane Product Use Case Quantity Needed/Used

1

TM40-0361-02 HC2 to  2.92 (F) Cable Assembly, 2R X 8 CH, 079 DIA. CABLE, 10″ ML4003BY Breakout testing cable 2


MultiLane offers turnkey solutions including application development, DUT load board design, and embedded high throughput application libraries. These solutions enable fully automated high-speed testing up to 112 Gbps of high-speed I/O devices. MultiLane’s twining test head extensions and load boards bring high-frequency resources like BERT scopes and DSO very close to the device under test and significantly enhance the signal integrity and test accuracy. CarlisleIT offers coax cable assemblies for loopback and connectivity of high-speed channels for automated testing using the custom load boards. These 0.047″ and 0.079″ coax cables have SMPM and precision RF 1.85 m connectors on each end for easy connectivity. Overall high signal integrity is achieved for the entire channel with low VSWR and insertion losses contributed by CarlisleIT’s cable assemblies.

Table 3: Custom Coax Cable Assemblies for ATE Solutions 

 

No. CarlisleIT Part Number Description MultiLane Product Use Case Quantity Needed/Used

1

TM40-0181-00 SMPM (M) Float Snap-in BH to SMPM (F) R/A ON 047” Coax Accessory for ATE Family Connecting cable and loopback cable 2

2

TM40-0200-XX 1.85 mm (M) to SMPM (F) BH Mount ON UFC092 Cable Accessory for ATE Family Loopback cable 2

MultiLane Specific Products

MultiLane manufactures high-performance, low-cost bit error testers, digital sampling oscilloscopes, and time domain reflectometers to benchmark the Signal Integrity performance of high speed 200 G/400 G transceivers.

Xilinx Specific Products

Carlisle Interconnect Technologies offers the highest quality and performing cable assemblies available, including those specific for Xilinz Zynq® UltraScale+™ RFSoC ZCU216.

Carlisle Interconnect Technologies offers the highest quality and performing cable assemblies available, including those specific for Xilinz Zynq® UltraScale+™ RFSoC ZCU216.

The Zynq® UltraScale+™ RFSoC ZCU216 Evaluation Kit is the ideal RF test platform for both out-of-box evaluation and cutting-edge application development. This kit enables designers to jumpstart RF-Class analog designs (Full sub 6 GHz RF bandwidth support) and features a Zynq UltraScale+ RFSoC supporting 16x 14-bit 2.5 GSPS ADCs, and 16x 14-bit 10 GSPS DACs.

 

Application Matrix below shows contents of standard kit and use cases requiring additional cable assemblies and adapters.

 

For more information and purchasing options, select a product name below.

 

Product Description

TM40-0176

DC Block Coaxial Connector 3.5 mm. BUY FROM DIGIKEY»

TM40-0153-00

Coaxial SSMP female to SSMP female. BUY FROM DIGIKEY»

TM40-0157-00

8 channel compression type to male SMA type CoreHC. BUY FROM DIGIKEY»

TM40-0158-00

8 channel compression type to female SMA type CoreHC. BUY FROM DIGIKEY»

TM40-0159-00

079-inch Coax Cable assembly with male SMA (male) connector on each side. BUY FROM DIGIKEY»

TM14-0084-00

Threaded lock male SSMP board mount connector. BUY FROM DIGIKEY»

TM40-0313-0X

SSMP-Secure Lock (F) to 2.92 (M), differential pair, 2 ps phase-matched Coax Cable Assemblies BUY FROM DIGIKEY»

 

 

Precision Solder Mount Connectors

Vertical Mount
Product PN & Description Downloadable Files Buy From
1.85 mm Connector – Standard
TMB-V8FS-3SM
Print & Footprint

3D STEP File

DIGIKEY» RICHARDSON»
2.4 mm Connector
TMB-V4FS-3SM
Print & Footprint

3D STEP File

DIGIKEY» RICHARDSON»
2.92 mm Connector
TMB-V9FS-3SM
Print & Footprint

3D STEP File

DIGIKEY» RICHARDSON»
3.5 mm Connector – Standard
TMB-V5FS-3SM
Print & Footprint

3D STEP File

DIGIKEY» RICHARDSON»
3.5 mm Connector – Long Leads
TMB-V5FS-3SM-01
Print & Footprint

3D STEP File

Standard Edge Launch
Product PN & Description Downloadable Files Buy From
1.85 mm Connector
TMB-E8FS-1S1
Print & Footprint

3D STEP File

DIGIKEY» RICHARDSON»
2.4 mm Connector
TMB-E4FS-1S1
Print & Footprint

3D STEP File

DIGIKEY» RICHARDSON»
2.92 mm Connector
TMB-E9FS-1S1
Print & Footprint

3D STEP File

DIGIKEY» RICHARDSON»
3.5 mm Connector
TMB-E5FS-1S1
Print & Footprint

3D STEP File

DIGIKEY»
Surface Mount Pick and Place Edge Connectors
Product PN & Description Downloadable Files Buy From
1.85 mm Connector
TMB-E8FS-1ST
Print & Footprint
3D STEP File
DIGIKEY» RICHARDSON»
2.4 mm Connector
TMB-E4FS-1ST
Print & Footprint
3D STEP File
DIGIKEY» RICHARDSON»
2.92 mm Connector
TMB-E9FS-1ST
Print & Footprint
3D STEP File
DIGIKEY» RICHARDSON»
3.5 mm Connector
TMB-E5FS-1ST
Print & Footprint
3D STEP File

Field Replaceable / Solderless Connectors

Vertical Mount CPW
Product PN & Description Downloadable Files Buy From
1.00 mm Connector
TMB-V1F2-3LC-0X
Print & Footprint
1.85 mm Connector
TMB-V8F2-3LC
Print & Footprint

3D STEP File

Signal Integrity Report

DIGIKEY»
2.4 mm Connector
TMB-V4F2-3LC
Print & Footprint

3D STEP File

Signal Integrity Report

DIGIKEY»
2.92 mm Connector
TMB-V9F2-3LC
Print & Footprint

3D STEP File

Signal Integrity Report

3.5 mm Connector
TMB-V5F2-3LC
Print & Footprint

3D STEP File

Signal Integrity Report

Vertical Mount Strip-line
Product PN & Description Downloadable Files Buy From
1.00 mm Connector
TMB-V1F2-2L1
Print & Footprint
1.85 mm Connector
TMB-V8F2-3L1
Print & Footprint

3D STEP File

DIGIKEY» RICHARDSON»
2.4 mm Connector
TMB-V4F2-3L1

Print & Footprint

DIGIKEY» RICHARDSON»
2.92 mm Connector
TMB-V9F2-3L1
Print & Footprint

3D STEP File

DIGIKEY» RICHARDSON»
3.5 mm Connector
TMB-V5F2-3L1
Print & Footprint

3D STEP File

DIGIKEY» RICHARDSON»
Edge Launch
Product PN & Description Downloadable Files Buy From
1.00 mm Connector
TMB-E1F2-1L1
Print & Footprint

Signal Integrity Report

1.85 mm Connector
TMB-E8F2-1L1
Print & Footprint

3D STEP File

Signal Integrity Report

DIGIKEY» RICHARDSON»
2.4 mm Connector
TMB-E4F2-1L1
Print & Footprint

3D STEP File

Signal Integrity Report

DIGIKEY» RICHARDSON»
2.92 mm Connector
TMB-E9F2-1L1
Print & Footprint

3D STEP File

Signal Integrity Report

DIGIKEY» RICHARDSON»
3.5 mm Connector
TMB-E5F2-1L1
Print & Footprint

3D STEP File

Signal Integrity Report

DIGIKEY» RICHARDSON»
Edge Launch – Flange Mount
Product PN & Description Downloadable Files Buy From
1.00 mm Connector
TMB-E1F4-1L1
Print & Footprint
1.35 mm Connector
TMB-E3F4-1L1
Print & Footprint
Edge Launch – 30 Degree Angled
Product PN & Description Downloadable Files Buy From
1.85 mm Connector
TM14-0089-00
Print & Footprint

Signal Integrity Report

3D STEP File

DIGIKEY» RICHARDSON»
2.4 mm Connector
TM14-0143-00
Print and Footprint

3D STEP File

2.92 mm Connector
TM14-0141-00
Print and Footprint

3D STEP File

RICHARDSON»
3.5 mm Connector
TM14-0142-00
Print and Footprint

3D STEP File

Edge Launch – Narrow Body
Product PN & Description Downloadable Files Buy From
1.85 mm Connector
TMB-E8F2-1L1-01
Print & Footprint

3D STEP File

2.4 mm Connector
TMB-E4F2-1L1-01
Print & Footprint

3D STEP File

2.92 mm Connector
TMB-E9F2-1L1-01
Print & Footprint

3D STEP File

3.5 mm Connector
TMB-E5F2-1L1-01
Print & Footprint

3D STEP File

1.0 mm Connector
TMB-E1F2-1L1-01
Print & Footprint
Edge Launch – Narrow Body – Flange Mount
Product PN & Description Downloadable Files Buy From
1.00 mm Connector
TMB-E1F4-1L1-01
Print & Footprint
1.35 mm Connector
TMB-E3F4-1L1-01
Print & Footprint

Carlisle Interconnect Technologies offers a wide portfolio of low-loss, high-frequency Precision RF Connectors in various configurations for design flexibility and multiple applications. CarlisleIT gives you design flexibility by offering both standard solderable surface-mount or solderless field replaceable precision RF connectors up to 110 GHz.

  • Solder and solderless/field-replaceable
  • 50 Ω Impedance
  • Frequencies ranging up to 110 GHz
  • CPW or Stripline
  • Multiple mating interfaces available: 1.00mm, 1.35 mm, 1.85 mm, 2.40 mm, 2.92 mm, and 3.5 mm
  • As an additional service CarlisleIT can simulate the board layout and stack-up for optimized footprints of connectors

CIT’s Precision Board-Mount Connectors are now available from distribution.

BUY FROM DIGIKEY» BUY FROM RichardsonRFPD»


Suggested Applications

  • High-Speed Digital Systems
  • Vector Network Analyzer (VNA)
  • Oscilloscope
  • Bit Error Ratio Tests (BERT)
  • Switch matrix
  • Automatic Test Equipment (ATE)
  • Semiconductors
  • Design validation testing
  • Integrators
  • Military/Defense
  • Electronic sensors
  • Radar/guidance systems

Features and Benefits

Feature Benefit
1.00, 1.35 mm, 1.85 mm, 2.40 mm, 2.92 mm, and 3.50 mm mating interfaces Multiple interface options cover a wide frequency band, offering standard and readily available stock with working frequencies up to 110 GHz
Solderless/field-replaceable options available Elimination of soldering enables fast and easy installation of high-performance connectors that can be removed and reused without damaging board and connector
Vertical flange-mount, edge launch, 30° angled, and solder-mount options Design flexibility for density limitations and to allow placement anywhere on the PCB
Gold-plated brass bodies (solder connectors only) Improved solderability and corrosion resistance
Rated to 500 mating/de-mating cycles Robust design ensures high signal integrity in a long-life package

Part Numbers and Specifications

For detailed specifications and part numbers, view the Precision RF Connectors product info sheet.

Performance Specifications

Connector Series Frequency Rating Connector Only Connector & PCB
Return Loss (-20 dB max) Insertion Loss (-0.2 dB max) Return Loss (-15 dB max) Insertion Loss (-0.6 dB max)
1.00 mm Connector DC – 110 GHz 110 GHz 110 GHz
1.85 mm Connector DC – 65 GHz 67 GHz 67 GHz
2.40 mm Connector DC – 50 GHz 50 GHz 50 GHz
2.92 mm Connector DC – 40 GHz 40 GHz 40 GHz
3.50 mm Connector DC – 34 GHz 34 GHz 34 GHz

AltaVel™ Open Pin Field Interconnect Solution

Carlisle Interconnect Technologies’ (CarlisleIT) AltaVel™ family of open pin field High-Speed Digital Interconnect is optimized to provide scalability and reliability in dense, high-mate/de-mate cycles applications greater than 25 Gbps. The broad family of connectors are available in the following configurations; Board to Board, Board to Cable, Cable to Cable and Cable to Panel. All configurations are available in the following styles: Vertical to Vertical, Right Angle to Vertical and Right Angle to Right Angle.

AltaVel™

The CarlisleIT AltaVel™ family of open pin field High-Speed Digital (>25 Gbps) Interconnect is optimized to provide scalability and reliability in dense, high-mate/de-mate cycles applications


Card-Edge Connectors

CarlisleIT’s Card Edge Connectors contact system is designed for high-speed, high-density applications. Card Edge Connectors have a smooth mating surface area, which reduces the wear and tear of contacts and increases the durability and cycle life of the contact system. They also lower insertion and withdrawal forces while supporting data rates up to 32 Gbps with excellent signal integrity.

Card Edge Connectors

CarlisleIT’s Card Edge Connectors contact system is designed for high-speed, high-density applications. Card Edge Connector Systems are suitable for: – PCIe Gen 5 and Gen 6 Systems – Gen Z Interconnect Systems – SATA, SATA Express, SaAS and NVMe Systems

 

High-Density RF Ganged Interconnects

CoreHC™ Ganged Interconnect System

High-performance compression mount multi-port interconnect system with both 2.5 mm and 4 mm spacing pitch. Designed for demanding bandwidths up to 65 GHz. Standard products are available in single-, 2-, 4-, 6-, 8-, and 10-channel configurations.

CoreGD™ Ganged Interconnect System

A high-performance, multiport interconnect system that offers excellent signal integrity to complex layouts and crowded PCBs.


RF Coax Jumpers

High-Performance, Low-Loss RF Coax Jumpers

Multiple configurations available with 1.85 mm, 2.40 mm, 2.92 mm, and 3.50 mm connector types on .079″ (outer shield diameter) coaxial cable. Low insertion loss and VSWR indicate their high quality and performance.


Precision RF Connectors

Precision Board-Mount Connectors

Low-loss, high-frequency precision RF connectors available in various configurations and 1.00, 1.35, 1.85, 2.40, and 3.50 mm options


RF Adapters

RF/Microwave Adapters

CarlisleIT RF/Microwave adapters, which include Precision Connectors, SMA, 3.5 mm, 2.92 mm, 2.4 mm, and 1.85 mm, are designed for optimal performance, and come standard in a passivated stainless steel body with a captivated Beryllium Copper center conductor to ensure mating reliability.


SecureThread Interconnect Systems

SecureThread™ Interconnect Systems

SecureThread is a high-performance Interconnect System from CarlisleIT. It uses a blind mateable push on interface with threaded coupling nut to avoid any movement of the cable assembly, once the connection is made. The interconnect system is available as solderless direct attach and solderable SSMP types and supports frequencies in the range of DC – 65 GHz with excellent signal integrity.

Wide variety of customizable, high-frequency RF cable assemblies for your test and measurement needs using UTiFLEX®, Semi-Flex®, Semi-Rigid and other cable options. Specific Test and Measurement cable assemblies include:


High-Performance, Low-Loss RF Coax Jumpers

CarlisleIT offers multiple configurations for RF cable jumpers with 1.85 mm, 2.40 mm, 2.92 mm, and 3.50 mm connector types on .079″ (outer shield diameter) coaxial cable. Low insertion loss and VSWR of CIT’s coax jumpers indicate the high quality and performance.


Single-Position

Includes our Field Replaceable and Secure-Thread™ connector systems that lead the Test & Measurement industry in providing high signal integrity in one of the smallest threaded-lock connector interfaces available.


Multi-Position

High-performance ganged multi-position interconnect systems include CoreGD™ and CoreHC™ PCB connector and cable assembly systems, providing the industry with optimal, high signal-integrity in increasingly dense applications.


MKR Test Cables

Using UTiFLEX® microwave cable as a base then outfitted with NOMEX®, a highly flexible and abrasive-resistant braid, MKR cable assemblies are is the ideal choice for test labs or any testing environment requiring excellent mechanical strength and long-term reliability in a compact package.


UTiFLEX® Low-Loss Microwave Cable Assemblies

For any application, from high-performance flexible interconnects for microwave systems to rugged everyday test leads, CarlisleIT UTiFLEX® flexible microwave cable assemblies provide unsurpassed performance.


Probes

Passive Probe is part of CarlisleIT’s full lineup of customizable interconnect solutions.

Part of Carlisle Interconnect Technologies’ (CarlisleIT) full lineup of customizable interconnect solutions, the P200 Passive Probe family is a standard, commercial off-the-shelf system engineered to deliver consistent, repeatable and dependable results.

Designed from ground up to provide a superior quality “look and feel” for customers who want the highest quality at low price.

The P200 Passive Probe family is fully customizable for color, shape, logos, markings and attenuation. Accessories can also be custom-designed to your application.

BUY FROM DIGIKEY» BUY FROM RichardsonRFPD»


Suggested Applications

  • Low power device services
  • Manufacturing engineering
  • Test research and development
  • Relative low-frequency measurement
  • Low-frequency computer and telecom measurements
  • Power supplies
  • Inverter design

Features and Benefits

 

Feature Benefit
250 MHz bandwidth Reliable performance and quality engineered at a low cost.
Highly configurable design Nearly all features can be configured to match unique “look and feel” and custom specification (attenuation, bandwidth, etc)
Third party certified, exceeds UL61010-31, IEC61010-31 Superior product quality backed by UL certification
1X, 10X switchable configuration Switchable configuration gives the flexibility to choose the attenuation that fits your application Non-switchable configurations available (contact us for more information)

 

Specifications and Performance

Parameter P200 -010S
(1X, 10X Switchable Attenuation)
Bandwidth DC – 10 MHz DC – 200 MHz
Attenuation Ratio 1:1 10:1
Max Input Voltage (V) *150 V Cat II *300 V Cat II
Input Resistance 1 M ohms 10 M ohms
Input Capacitance (pF) <110 pF 15 pF
Compensation Range N/A 10 – 25 pF
Rise Time <35 ns <2.1 ns
Safety Conformance to Low Voltage Directive (LVD) 73/23/EEC, amendment 93/68/EEC;
IEC-61010-031:2015
Operating Temperature 0 to 50 C, 80% RH
Storage Temperature -40°C to 70°C
Operating Altitude up to 2,000 m
Storage Altitude up to 15,000 m

Voltage Derating Curve

P200 - Voltage Derating Curve


10x Bandwidth

P200 - 10x Bandwidth


1x Bandwidth

P200 - 1x Bandwidth

Ordering Information

Model Description
P200-010S 1X,10X Switchable Probe Kit
Kit Includes: » Probe
» Grabber Hook
» Insulating Tip Cap
» BNC Adapter
» RF Ground Spring
» Adjusting Screw Driver
» Alligator Ground Lead
» Instruction Manual

P200 - Ordering

Probe (1), Grabber Hook (2), BNC Adapter (3), Alligator Ground lead (4), RF Ground Spring (5).

Part of Carlisle Interconnect Technologies’ (CarlisleIT) full lineup of customizable interconnect solutions, the P500 Passive Probe family is a standard, commercial o-the-shelf system engineered to deliver consistent, repeatable and dependable results.

Designed from ground up to provide a superior quality “look and feel” for customers who want the highest quality at low price.

The P500 Passive Probe family is fully customizable for color, shape, logos, markings and attenuation. Accessories can also be custom designed to your application.

BUY FROM DIGIKEY» BUY FROM RichardsonRFPD»


Suggested Applications

  • Low power device services
  • Manufacturing
  • Test research and development
  • Low to medium frequency measurement
  • Low-frequency computer and telecom measurements
  • Power supplies
  • Inverter design

Features and Benefits

Feature Customer Benefit
Miniaturized Probe Head Ideal for probing ne pitch ICs and dense geometry circuit elements common on modern electronics
Probe Coding Automatic attenuation scaling via BNC interface when used with compatible oscilloscopes
Third party certified, exceeds UL61010-31, IEC61010-31 Superior product quality and safety assured by Underwriter Laboratory certification
Customizable Design Carlisle IT can provide custom designs to match electrical performance and industrial design requirements for probe and probe accessories

Specifications and Performance

Parameter P500-010 (10X)
Bandwidth DC – 500 MHz
Attenuation Ratio 10:1
Max Input Voltage (V) *300 V Cat II
Input Resistance 10 M ohms
Input Capacitance (pF) 11 pF
Compensation Range 10-35 pF
Rise Time <0.9 ns
Safety Conformance to Low Voltage Directive (LVD) 73/23/EEC, amendment 93/68/EEC;
IEC-61010-031:2015
OperatingTemperature 0 to 50 °C, 80% RH
Storage Temperature -40 °C to 70 °C
Operating Altitude up to 2,000 m
Storage Altitude up to 15,000 m

Voltage Derating Curve

P500 - Voltage Derating Curve


P500 - Voltage Derating Curve - 2

Ordering Information

Model Description
P500-010 10X Probe Kit
Kit Includes: » Probe
» Grabber Hook
» Insulating Tip Cap
» BNC Adapter
» Replacement Tips
» RF Ground Spring
» Adjusting Screw Driver
» Alligator Ground Lead
» Instruction Manual

P500 - Ordering

Probe (1), Grabber Hook (2), BNC Adapter (3), Alligator Ground lead (4), RF Ground Spring (5), Adjustment Tool (6), Replacement Tips (7)

Part of Carlisle Interconnect Technologies’ (CarlisleIT) full lineup of customizable interconnect solutions, the Passive Probe is a standard, commercial off-the-shelf system engineered to deliver consistent, repeatable and dependable results.

The Passive Probe provides an industry-leading combination of high bandwidth and high voltage in a low cost, rugged, general purpose probing solution, while the small UL-approved probe body and compact head enable the user to have access to small geometry circuit elements.

BUY FROM DIGIKEY» BUY FROM RichardsonRFPD»


Suggested Applications

  • Low power device services
  • Manufacturing engineering
  • Test research and development
  • Relative low-frequency measurement
  • Low-frequency computer and telecom measurements
  • Power supplies
  • Inverter design

Features and Benefits

Feature Customer Benefit
500 MHz bandwidth AND 1,000 V Cat III, 600 V CAT IV A combination of high bandwidth and high voltage reduces the number of probes needed for a variety of applications, simplifying the toolkit and lowering costs
1X, 10X and 100X configurations Multiple configurations give the flexibility to choose the passive probe that fits your application
Third party certified, exceeds UL61010-31, IEC61010-31 Superior product quality and safety greatly reduces risk in high voltage applications
Small, compact probe head and body Enhanced visibility to small, dense geometry circuit elements within the contact device-under-test (DUT) ensures correct and accurate test point

Specifications and Performance

Parameter TM50-0012-00 (1X) TM50-0013-00 (10X) TM50-0014-00 (100X)
Bandwidth DC to 50 MHz DC to 500 MHz DC to 500 MHz
Attenuation Ratio 1:1 10:1 100:1
Max Input Voltage (V)

*CAT III 600V, CAT IV 300V, 50 MHz

*CAT III 1000V, CAT IV 600V, 500 MHz

*CAT III 1000V, CAT IV 600V, 500 MHz

Input Resistance Impedance of measuring instrument 10 M ohms 100 M ohms
Input Capacitance (pF) 42 pF 12 pF 4.5 pF
Compensation Range N/A 10 – 25 pF
center @ 15 pF
10 – 25 pF
center @ 15 pF
Rise Time Instrument spec + 6 ns <1 ns <1 ns
Safety Conformance to Low Voltage Directive (LVD) 73/23/EEC, amendment 93/68/EEC;
Operating Temperature 0 to 60 C, 80% RH
Storage Temperature -40 °C to 71 °C
Operating Altitude up to 3,000 m
Storage Altitude up to 15,000 m

Voltage Derating Curve

HTP500- Voltage Derating Curve


TM50-0013-00 Passive Probe 10:1, 500 MHz (20 dB) 1.2 m

(N5171B @ 0 dBm, MSO-S104A set @ 1 M , avg. 16, w/50 load)
TM50-0013-00

Ordering Information

Model Description
TM50-0012-00 1X High-Voltage Probe Kit
TM50-0013-00 10X High-Voltage Probe Kit
TM50-0014-00 100X High-Voltage Probe Kit
Kit Includes: » Probe
» Grabber Hook
» Insulating Tip Cap
» BNC Adapter
» RF Ground Spring
» Adjusting Screw Driver
» Alligator Ground Lead
» Instruction Manual

HTP500- Ordering -1


HTP500- Ordering -2

Member of
©2024 Carlisle Interconnect Technologies. All Rights Reserved.
All trademarks, service marks and trade names are property of their respective holding companies.
CarlisleIT products are subject to U.S. export control regulations.
They may be subject to certain licensing requirements and restricted for export. 
This site is registered on Toolset.com as a development site.