CoreHC™ Ganged Interconnect System


CoreHC™ is a high-performance multi-port interconnect system targeted for high-density boards where space is limited. Available in 2.5 mm and 4.0 mm spacing pitch, it offers reduced trace lengths and higher signal integrity compared to boards using traditional SMA and Precision RF-type connectors. On average, there is 4x higher available bandwidth for signals in the same real estate as SMA connectors.

Our unique compression force design results in easy and rapid connectivity of high-frequency signals on the board. The 2.5 mm solution is designed for demanding bandwidths up to 65 GHz. Standard products are available in single and dual row 2-, 4-, 6-, 8-, 10-, and 16-channel configurations. Since there are configurations using single or multiple channels, board size can be optimized accordingly.

Vertical Mount

The vertical mount attachment solution eliminates the board-side connector or interposer by offering a direct connection of signals between the traces and pads on the PCB footprint and the compression pins on the cable assembly.

Edge Mount

A board-side interposer is required for an edge-mount-type solution. Optimized footprints and layouts are available upon request.

Right-Angle Mount

With a maximum connector height of only 9.08 mm, right-angle CoreHC cable assemblies are very useful in transmitting and receiving high-frequency signals up to 65 GHz to and from low-profile-height printed circuit boards to analyzers and other sub-systems. Similar to edge-mount and vertical-mount configurations, the right-angle CoreHC solution is offered with 3.5 mm, 2.92 mm, 2.40 mm, or 1.85 mm precision RF connectors on the cable side, depending on the required frequency of operation. The right-angle CoreHC solution is available in 2-, 4-, 6-, and 8-channel configurations.

CoreHC products are available from these approved distributors:

BUY FROM DIGIKEY» BUY FROM RichardsonRFPD»

Configurations

Configurations and outlines of CoreHC interconnect.

CoreHC Edge Mount
CoreHC Edge Mount
CoreHC Edge Mount

Features & Benefits

Feature Benefit
DC to 65 GHz frequency range Supports a variety of current and emerging applications, reducing overall cost
Board footprint compatibility Can be used with Coplanar Wave Guide (CPW) and strip line PCB traces
Multiple board-to-board solutions 8 mm to 20 mm stack-up height in 2 mm increments to meet certain height restrictions
One-piece interface for vertical-mount type Saves time and reduces costs because no soldering to the board is required; only PEM nuts are used for installation and removal
Zero force to disengage Eliminates damage to PCB solder joints and footprints
10,000 mate/demate cycles High signal integrity in a long-life package provides high performance and lower cost of ownership
Smaller overall footprint size 2.5 mm pitch to access signals in dense environments and save PCB space
2 picosecond phase matching High signal integrity
2.92 mm and 1.85 mm cable-side connectors Supports frequencies up to 65 GHz
0.047″ and 0.079″ coax cables are available High-performance, microwave-grade, flexible coaxial cables offer high density, high frequency, and low losses
Cable length options Standard lengths offered in cm increments (custom lengths available upon request)
Edge launch/mount option Design flexibility for complex board layouts
Multiple channels Standard products available in single and dual row, 2, 4, 6, 8, and 10 channels (custom configurations upon request)
Multiple signal probing Probing is possible on single-ended or differential signals
Flexible cables Offers high electrical and mechanical stability
Tilt protection Shape of housings ensures high mechanical stability
Keying Eliminates mismating
No custom tooling required Interconnect mounts on board with standard tools
Solder-free installation Interposer-less design, no solder on PCB required
Field-replaceable Can be moved, reconfigured, and replaced in the field with standard tools

BUY FROM DIGIKEY» BUY FROM RichardsonRFPD»

Mounting CoreHC

PEM nuts need to be installed on the back of the PCB to mount the CoreHC interconnect cable assembly firmly in place. We offer six types of PEM nuts in both unplated/machined and plated finishes for different board thickness profiles as follows:

CoreHC Edge Mount

Comparing near-end crosstalk for CoreHC interconnect in strip line and CPW designs. Less than -50 dB.

CoreHC products are available from these approved distributors:

BUY FROM DIGIKEY» BUY FROM RichardsonRFPD»

Product Information Resources

CoreHC™ Datasheet
Orderable PNs / Nomenclature: Core Cables
Orderable PNs / Nomenclature: Core Board-Side Connectors

3D Step Files

Edge-Launch Board-Side Connectors

8-Channel
10-Channel

Signal Integrity Reports

Vertical Launch to Board Mount

8-Channel CoreHC to 1.85 mm RF Connector – CPW
Dual-Channel CoreHC to 1.85 mm RF Connector – CPW
Dual-Channel CoreHC to 1.85 mm RF Connector – Stripline

CoreHC to 1.85 mm Adapter Cable Assembly Only

Single-Channel 1.85 mm CoreHC Cable to 1.85 mm RF Adapter

Prints & Footprints

Vertical-Mount CPW Single-Ended Footprint
Vertical-Mount Stripline Single-Ended Footprint
Edge-Launch 2-10 Positions Connectors
Edge-Launch CPW Single-Ended Footprint
CoreHC Single-Channel Cable Assembly
2-10 Positions CoreHC Cable Assemblies


Product Categories

Test & Measurement Products

Product Markets

Commercial Aerospace
Industrial
Military-Defense
Space
Test & Measurement

More Information

To inquire about CoreHC™ Ganged Interconnect System available from CarlisleIT, please fill out the form below, and one of our Sales Engineers will contact you.

"*" indicates required fields

cookie*
Member of
©2024 Carlisle Interconnect Technologies. All Rights Reserved.
All trademarks, service marks and trade names are property of their respective holding companies.
CarlisleIT products are subject to U.S. export control regulations.
They may be subject to certain licensing requirements and restricted for export. 
This site is registered on Toolset.com as a development site.