ARINC 600 Tray Preference Selection Guide

Note: Standard off-the-shelf ARINC 600 trays can be modified. For special requirements such as shock or vibration isolation, non-standard tray lengths, alternate mounting hole patterns, cooling, air filtration or any other custom specifications, please complete the 600 Custom Tray Worksheet.

ECS Fan Cooled Trays conform to ARINC Level 1 maximum cooling requirements for pressurized mounting.
Consult avionics equipment installation manual or contact ECS to determine cooling requirements.
Note: For non-pressurized applications use the Custom Tray Worksheet.

The ARINC 600 Tray Selection Guide will assist in generating the following Spec Number:

1	ARINC Tray Specification		Select Code
	ARINC 600		6

2	Tray Width		Select Code
	1 MCU		01
	2 MCU		02
	3 MCU		03
	4 MCU		04
	5 MCU		05
	6 MCU		06
	7 MCU		07
	8 MCU		08
	9 MCU		09
	10 MCU		10
	11 MCU		11
	12 MCU		12

3	Tray Length		Select Code
	Short/Short = 14.92		S
	Short/Long = 20.06		L
	Short/X-Long = 21.92		X

4	Hold Down Types		Select Code
	Front Insertion/Extraction		1
	Front Thumbscrew		2

5	Are Mounting Holes Required?		Select Code
	No		N
	Mounting Holes for No.6 Mounting Hardware		A
	Mounting Holes for No.8 Mounting Hardware		B
	Mounting Holes for No.10 Mounting Hardware		C

6	Tray Bottom		Select Code
	Deformation with Metering Plate (not available for 1 MCU trays)		1
	Deformation Only (not available for 1 MCU trays)		2
	Flat		3
	Flat with Oval Cutout		4

7	Tray Finish (Mil-C-5541)		Select Code
	Clear Chem-Film		C
	Gold Chem-Film		G

8	ARINC 600 Level 1 Cooling
	Fan Location	Fan Type	Select Code
	None	---	0
	Bottom	115VAC 400Hz	1
	Left	115VAC 400Hz	2
	Right	115VAC 400Hz	3
	Rear	115VAC 400Hz	4
	Bottom	28VDC	5
	Left	28VDC	6
	Right	28VDC	7
	Rear	28VDC	8

Main menu

ARINC 600 Tray Preference Selection Guide

Structures

Products

CarlisleIT

Legal

© 2012 Carlisle Interconnect Technologies